ACK flood attack
Protocol AttacksDec 21, 2022
5 min read
ACK flood Attack
ACK flood attack is a type of network attack that involves overwhelming a server or network device with a large number of ACK (acknowledgment) packets. The goal of this attack is to consume the target's resources, such as bandwidth and processing power, and cause it to become unavailable to legitimate users.
ACK flood attacks work by sending a large number of ACK packets to the target system, typically using a network of compromised devices (a botnet) or a reflection and amplification attack. The ACK packets typically have a spoofed source address, so they appear to be coming from a legitimate source. When the target system receives these packets, it responds with a SYN-ACK (synchronize-acknowledge) packet, which is part of the three-way handshake used to establish a connection in the TCP (Transmission Control Protocol) protocol.
The goal of an ACK flood attack is to consume the target's resources, such as bandwidth and processing power, and make them unavailable to legitimate users. When the target system receives an ACK packet, it responds with a SYN-ACK (synchronize-acknowledge) packet as part of the three-way handshake used to establish a connection in the TCP (Transmission Control Protocol) protocol. However, because the target does not receive a SYN (synchronize) packet in response to the SYN-ACK packet, it continues to send SYN-ACK packets in an attempt to establish a connection. This consumes the target's resources, as it must continue to process and respond to the SYN-ACK packets. As the volume of ACK packets increases, the target system may become overwhelmed and unable to process legitimate traffic, resulting in a denial of service (DoS) attack.
Here are some key points to consider when it comes to ACK flood attacks:
- ACK flood attacks exploit the fact that a system or network will typically send an ACK packet in response to any packet that it receives. By sending a high volume of packets to a target system, an attacker can create a flood of ACK packets that can overwhelm the system and disrupt its ability to communicate.
- ACK flood attacks can be launched using a variety of tactics, such as spoofing the source IP address of the ACK packets or using a botnet to generate a large volume of traffic.
- ACK flood attacks can be difficult to detect and defend against because they can be launched from a single source, and it can be challenging to distinguish between legitimate traffic and attack traffic.
- To protect against ACK flood attacks, it is important to implement measures such as firewall rules and rate limiting to help mitigate the risk of these types of attacks. It is also important to have robust network monitoring in place to help identify and respond to potential ACK flood attacks as they occur.
Overall, ACK flood attacks are a serious threat to network and system security, and it is important for organizations to be aware of the risks and to take appropriate steps to protect against them.
ACK packet
ACK stands for "acknowledgment," and an ACK packet is a type of packet used in the TCP (Transmission Control Protocol) protocol to acknowledge the receipt of data. In the TCP protocol, data is transferred between two devices in a series of packets. When one device sends a packet of data to another device, the receiving device sends an ACK packet back to the sender to confirm that it has received the data.
The ACK packet is part of the three-way handshake used to establish a connection in the TCP protocol. The three-way handshake consists of the following steps:
-
The initiating device (also known as the client) sends a SYN (synchronize) packet to the receiving device (also known as the server), requesting to establish a connection.
-
The server responds with a SYN-ACK (synchronize-acknowledge) packet, acknowledging receipt of the SYN packet and requesting a connection.
-
The client sends an ACK packet back to the server, acknowledging receipt of the SYN-ACK packet and completing the three-way handshake.
After the three-way handshake is complete, the two devices can begin transferring data over the established connection. The ACK packet is then used to confirm the receipt of each subsequent packet of data.
It's important to note that ACK packets are used only in the TCP protocol, and are not used in the UDP (User Datagram Protocol) protocol. In the UDP protocol, there is no concept of a connection, and data is simply sent from one device to another without the need for acknowledgment.
How does DiamWall mitigate ACK Flood attacks?
As a CDN, DiamWall is responsible for routing traffic between users and the backend servers of our customers. We act as an intermediary between the two, and as such, we have the ability to intercept and evaluate incoming traffic before it reaches our customers' servers. To mitigate ACK flood attacks, we use advanced traffic analysis techniques to filter out any malicious ACK packets that may be part of the attack. This includes examining the source and destination addresses, as well as the payload of the packets, to determine whether they are part of a legitimate request or part of an attack.
In addition to this, we have implemented measures to ensure that ACK packets are only passed along if they are associated with an open TCP connection. This helps to prevent malicious ACK traffic from reaching our customers' origin servers.
Our network of data centers is also designed to absorb DDoS attacks of almost any size, meaning that even if an ACK flood attack were to reach our network, it would be unlikely to cause any significant disruption or downtime for our customers. Overall, DiamWall's mitigation systems are designed to detect and mitigate any ACK attack at any scale, ensuring that our customers' servers remain protected against ACK flood attacks and other types of malicious traffic.
To learn more about how DiamWall CDN protects against ACK flood attacks and other types of DDoS attacks, please follow this topic. Our advanced traffic analysis techniques help to detect and filter out malicious ACK packets, while our distributed network of data centers is designed to absorb even the largest DDoS attacks. With DiamWall, you can have peace of mind knowing that your service is protected against any type of UDP attack at any scale.